Overhang: 25°/30°/35°/40°/45° - depending on printed material/cooling, these will not be as seen on the rendering providedįlatness: all flat areas - these should be flat with no gaps We’ve used the same slicing parameters on every machine to have somewhat similar results. Minimum distance between walls: 0.1/0.2/0.3/0.4/0.5 mm - depending on your nozzle size and slicer settings you will get different results

Rounded print: wave, half sphere - check if all things look nice and smooth Nut size: M4 nut should fit perfectly - insert an M4 nut it should need a little pressureįine details: pyramid, cone, all numbers - check if all things look nice and smooth Hole size: 3 holes (3/4/5mm) - measure with a caliper/drill Size: the object is 4 x 50 x 50 mm (baseplate) - measure with a caliper The article explains what should be measured as pointed below: To do this, we’ve used a file from available on thingiverse. Experimentation make it happen Group Assignment - participants: Josep Marti, Felipe Santos, Alberto Lopez, Diar Amin, Gustavo Abreu Test file To test the different printers, the best option is to print a part that shows how the printer behaves in different situations.

Autodesk memento 32 bit